When doing manicure, you usually need to clean and polish your nails first to remove the grease on them, so that the nails will be firmer. There are many kinds of nail polish tools, do you know which ones are specific?
Polishing sponge: Generally, it is used in conjunction with dry powder nails or paste nail polish to polish and polish the nails. When using, always follow one direction, do not sand back and forth, and the sponge must be replaced after use.
Sanding block: only used for polishing crystal armor, similar to a rectangular sponge cylinder, with sandpaper on the surface. It has obvious trimming effect for uneven nail surface and can make nail surface smooth and delicate.
Sanding strips: There are different sizes between 60 and 1200. The lower the size, the higher the sanding strength, and the lower the size, the softer the sanding strips. The commonly used sizes are No. 60 and No. 80, which are extremely corrosive; No. 100 has coarser grains and is used for large-area polishing in the crystal nail service to trim the shape of the crystal nail. No. 180 can be used to polish the contour and epidermal protective film area. No. 320 and above can make the nails brighter.
Foot sand board: used to remove calluses on the feet. Before sanding, soak the feet with warm water to soften the dead skin, and then use a foot sand board to remove the soaked dead skin. After sanding, apply foot cream on it.
